Obstetric Coding

The global period

Billing codes for maternity care and delivery are used to report antepartum care, vaginal or cesarean delivery, and postpartum care in uncomplicated pregnancies. Antepartum care includes the initial prenatal history and examination, subsequent prenatal history and examinations, recording of weight, blood pressures, fetal heart tones, routine chemical urinalysis, and monthly visits up to 28 weeks’ gestation; biweekly visits to 36 weeks’ gestation; and weekly visits until delivery. Delivery services include the hospital admission, management of uncomplicated labor, and cesarean or vaginal delivery (including episiotomy and repair if needed). Postpartum care includes visits in the hospital and a 6-week follow-up in the office following delivery. It may also include services related to a cesarean delivery, such as an incision check.

When billing for maternity care and delivery, codes exist to bill the global package (antepartum care, delivery, and postpartum care) or for specific components in the event you are billing for a provider who performed the antepartum care only, delivery only, or postpartum care only.

Note that pregnancy confirmation during a problem-oriented or preventive visit is not considered part of antepartum care and should be reported separately using the appropriate E/M code (for example an Outpatient Office Visit Code, 99201-99215). Also, remember that medical complications of pregnancy (eg, cardiac problems, neurological problems, diabetes, hypertension) and medical problems complicating labor and delivery management may require additional resources and should be billed separately – they are not included in the “global OB package.”

Delivery coding

When it comes to billing for maternity care and delivery, the number of code options can be confusing. Simply put, there are codes to report the global package, or components of it (as discussed above) depending on the method of delivery. For example, 59400 is used to report Routine OB care including antepartum care, vaginal delivery, and postpartum care. Codes immediately following 59400 report individual components of the global package. Code 59510 reports Routine OB care including antepartum care, cesarean delivery, and postpartum care.

However, there’s one more wrinkle that confuses some coders: Patients who have had a previous cesarean delivery and now present with an expectation of vaginal delivery have their own set of delivery codes, depending on the outcome. 59610 reports routine OB care including antepartum care, vaginal delivery, and postpartum care after a previous cesarean delivery. 59618 is used when the same patient with a previous cesarean attempts a vaginal delivery but delivers again via cesarean section.

ICD-10 concepts

With ICD-10 OB coding came a new set of billing guidelines that can be complicated, especially for newer coders trying to get acclimated to coding. The first important consideration when selecting a diagnosis code is to read the guidelines for each section. The ICD-10 guidelines state that codes for chapter 15 (Complications of Pregnancy, Childbirth, and the Puerperium) have sequencing priority over other codes from other chapters and are to be listed first unless the pregnancy is completely incidental and has nothing to do with the reason for the visit.

Another important consideration is the fact that in ICD-10, most of the diagnoses in chapter 15 include the concept of trimester. The guidelines state that not only should you select the code with the appropriate trimester for the current encounter, but a separate code (Z3A.–) should be used to report the weeks gestation for the encounter. For example, a patient in her 16^th week of pregnancy should be assigned a code from chapter 15, followed by the code Z3A.16 to indicate 16 weeks’ gestation.

Routine vs problem visits

For a routine outpatient prenatal visit when no complications are present, select a diagnosis code from range Z34, Encounter for Supervision of Normal Pregnancy, as the primary diagnosis. Remember that on average, the global OB package encompasses 13 routine visits during pregnancy, which includes routine visits in uncomplicated cases, and 6 weeks postpartum care. This may include H&Ps, routine measurements, and educational services such as breastfeeding or basic newborn care. Services that are not part of the global OB package may be billed separately, such as an initial evaluation and management service to diagnose pregnancy, amniocentesis, cephalic version, additional E&M services for unrelated reasons (e.g., asthma or urinary tract infection) or greater frequency of visits due to a high-risk pregnancy. Sometimes coders get confused and either miss out on billing a service that isn’t included in the global OB package or they mistakenly try to bill for a visit that is included in the package.

Sometimes our patients (and our coding) can be routine, but other times things can get complicated. Having a good understanding of what is included can help you be prepared so that when you encounter a situation that isn’t included, you don’t forget to bill for it. It always helps to have your (heavily marked up and highlighted) coding manuals and/or cheat sheets nearby, and reimbursement policies from your office’s biggest payers on your computer.

Comments

Vascular Catheterization - Coding

Vascular system anatomy and terminology to make reporting these procedures less challenging. A thorough understanding of the anatomy and medical terminology of the vascular system is required to accurately code arterial vessel procedures. Here’s a quick run-through of clinical information and coding guidance to show you how order affects coding. Order Matters Please refer to Appendix L of the CPT® code book for the vascular families. The aorta is the major artery. Each main vessel branching off the aorta is a first order vessel (e.g., left common carotid). First order vessels have several vessels branching off them, designated as second order vessels (e.g., right subclavian and axillary). Second order vessels have several vessels branching off them, designated as third order vessels (e.g., right internal carotid). Third order vessels have several smaller vessels branching off them, designated as beyond the third order (e.g., left deep palmar arch). Catheterization Can Ei...

Systemic vs. Pulmonary Circulation

What Does the Heart Do? The heart is a pump, usually beating about 60 to 100 times per minute. With each heartbeat, the heart sends blood throughout our bodies, carrying oxygen to every cell. After delivering the oxygen, the blood returns to the heart. The heart then sends the blood to the lungs to pick up more oxygen. This cycle repeats over and over again. What Does the Circulatory System Do? The circulatory system is made up of blood vessels that carry blood away from and towards the heart. Arteries carry blood away from the heart and veins carry blood back to the heart. The circulatory system carries oxygen, nutrients, and hormones to cells, and removes waste products, like carbon dioxide. These roadways travel in one direction only, to keep things going where they should. What Are the Parts of the Heart? The heart has four chambers — two on top and two on bottom: · ...

Injections & Infusions Coding

Here are the three basic coding rules that you must adhere to when billing for Injection/Infusion services: Rule #1: Pay Attention to the Administration Route When you’re looking at the treatment note, you can first look for hints to proper coding by identifying the Route of Administration. the Injection/Infusion CPT® codes fall into one of three major categories: 1. Intravenous Infusions (IV) 2. Intravenous Pushes (IP) 3. Injections (Sub-Q, IM) Don’t forget: The Centers for Medicare & Medicaid Services (CMS) regulations look at the way a drug is administered only as “the physical process by which the drug enters the patient’s body” – not whether a medical professional administers the drug or supervises the administration. But the administration route hierarchy isn’t the only one you need to understand for Injection/Infusion coding — there is another hierarchy for the type of agent that works in tandem with the administration one. Rule #2: Unde...

Place Holder X

The letter " x ” serves as a placeholder when a code contains fewer than six characters and a seventh character applies. The " x ” also allows for future expansion of the codes. When reporting ICD - 10 - CM codes, coders must add a placeholder so the seventh character is in the correct position. Not every ICD-10-CM code with a seventh character has a sixth character—or even a fifth or fourth character for that matter. This frequently occurs with poisonings and injuries. The letter "x” serves as a placeholder when a code contains fewer than six characters and a seventh character applies. The "x” also allows for future expansion of the codes. When reporting ICD-10-CM codes, coders must add a placeholder so the seventh character is in the correct position. Without this placeholder to ensure characters appear in the correct positions, codes are invalid. For example, a patient presents with an accidental poisoning by an antiallergic drug. For the initial ...

Burns and Corrosions

Chemicals, such as lye or acid, can cause corrosion upon contact with a person's skin. As a professional coding specialist, you may need to code the diagnosis of a burn or corrosion. A chemical burn occurs when living tissue is exposed to a corrosive substance such as a strong acid or base. Chemical burns follow standard burn classification and may cause extensive tissue damage. Burns from a heat source are classified by depth (first, second, third, unspecified), extent, and agent. For multiple burns, sequence the highest degree burn first. Multiple burns of the same three-character category are coded to the highest degree. Non-healing burns are coded as acute burns. The extent of injury is best described using the percentage of the total body surface area (%TBSA) that is affected by a burn. The measurement of burn surface area is important during the initial management of people with burns for estimating fluid requirements and determining need for transfer to a burns service T...

Fracture Treatments & Cast application

Correctly coding casts, splints, and strapping can be confusing. Much of the confusion is related to what type of materials are classified as casts, splints, or strapping; whether the CPT application codes or the HCPCS level II codes should be assigned; and whether the work performed is included in E/M codes. This article provides general guidance and suggested best practices for sorting out these issues. Defining Treatment Modality A cast is a “rigid dressing, molded to the body while pliable and hardening as it dries,” that provides firm support; it does not allow movement. 1 A splint is any stiff device attached to a limb in order to discourage movement. There are two types of splints: static or dynamic. 2 Static splints provide full immobilization, while dynamic splints allow some movement. 3 Strapping refers to the application of overlapping strips of adhesive plaster or tape to a body part to exert pressure and hold a structure in place. 4 Basic Rules ...

DRG – Diagnosis related grouping

Medicare and many health insurance companies pay hospitals using DRGs, or diagnostic related groupings. This means the hospital gets paid based on the admitted patient’s diagnosis rather than based on what it actually spent caring for the hospitalized patient. If a hospital can treat a patient while spending less money than the DRG payment for that illness, the hospital makes a profit. If, while treating the hospitalized patient, the hospital spends more money than the DRG payment, the hospital will lose money on that patient’s hospitalization. This is meant to control health care costs by encouraging the efficient care of hospitalized patients. Why You Should Care How a DRG Is Determined If you’re a patient, understanding the basics of what factors impact your DRG assignment can help you better understand your hospital bill, what your health insurance company or Medicare is paying for, or why you’ve been assigned a particular DRG. If you’re a physician rather than a p...

Combination Codes

It’s one of the most important questions coders must ask while using ICD-10: Is there a single combination code that fully identifies the patient’s relevant conditions, or is it necessary to report two separate codes? The volume of combination codes in ICD-10 has increased, making it imperative for coders to be alert and aware of instances in which combination codes are applicable. Defining Combination Codes The ICD-10-CM Official Guidelines for Coding and Reporting describe combination codes as those used to classify the following: • Two diagnoses • A diagnosis with an associated secondary process (manifestation) • A diagnosis with an associated complication Coders cannot — and should not — assign multiple diagnosis codes when a single combination code clearly identifies all aspects of the patient’s diagnosis. For example, say a pati...

Spleen - Anatomy

The spleen is an organ located in the upper left abdomen, and is roughly the size of a clenched fist. In the adult, the spleen functions mainly as a blood filter, removing old red blood cells. It also plays a role in both cell-mediated and humoral immune responses. The spleen in located in the upper left quadrant of the abdomen, under cover of the diaphragm and the ribcage – and therefore cannot normally be palpated on clinical examination (except when enlarged). It is an intraperitoneal organ, entirely surrounded by peritoneum (except at the splenic hilum). The spleen is connected to the stomach and kidney by parts of the greater omentum – a double fold of peritoneum that originates from the stomach: The spleen has a slightly oval shape. It is covered by a weak capsule that protects the organ whilst allowing it to expand in size. The outer surface of the spleen can be anatomically divided into two: · ...

Glossary of Coding Conventions and Rules

Terms Definitions see also instructional term in the index that is located after a main term or subterm and directs the coder to another main term (or subterm) that may provide additional useful index entries. see instructional term in ICD–9–CM and ICD–10–CM/PCS that directs the coder to refer to another term in the indexes the code. see category instructional term in the index that directs the coder to the tabular list, where a code can be selected from the options provided. see condition instructional term in the index that directs the coder to the main term for a condition. abbreviation use of NEC (not elsewhere classifiable) and NOS (not otherwise specified). (NEC and NOS abbreviations do not appear in ICD–10–PCS.) abbreviations use of NEC (not elsewhere classifiable) and NOS (not otherwise specified). (NEC and NOS abbreviations do not appear...

Medical Coding Simplified

Search This Blog